During installation, the bolts should be loosened, and the welding seam of the side plate and the bottom rib plate connecting the foundation and the flange should be cut open, and the pre-tightening bolts on the joint surface should be processed according to the above operation, and then welded. If the location and cause of the leak cannot be determined, or if the operation effect is not good,...

The oil leakage of the reducer mainly occurs in the output shaft of Kaolin Milling Equipment, the part where the gear reducer and the motor are connected, usually due to overload or the reducer does not operate for a long time, resulting in seal failure.  In order to prevent the reducer from continuing to leak oil, the two-part oil seal can be replaced. In addition, it is also necessary to...