Canon Pixma MG3022 is all in one printer which can help the users with amazing features like Auto power on and built-in wifi which makes it super convenient. If you are a user of Canon Pixma MG3022 then make sure you read this blog to know how to setup canon Pixma mg3022.
If you are looking for solutions for how to setup canon Pixma mg3022, you can follow these steps to setup wireless connection:
- Make sure your printer has a physical WPS button so that your access point is determined.
- Internet should be secure
Confirm your how to setup canon Pixma mg3022
- Take a trial verification of your printer to check if the internet connection is connected and secure.
- Make sure your printer is on.
- You should check the “ network connection” on your Canon Pixma MG printer and ensure sure your connection is “active”.
- Load the tray with any type of paper preferably white plain to check correctly.
- Start the button and you will notice blinking, wait till its stable
- Your test document will be printed.
Steps on How to connect it isnon MG3022 printer to Wi-Fi
- Turn your printer on and make sure your Wifi button is on and the blue light is shining.
- Turn on the WPS button on your access point for a while
- Blue light Flash will continue blinking
- Till its blinking, its trying to connect to the Wifi
- Once it is connected to the access point and Wi-Fi will become stable.
- Put a sheet of paper for a trial run after connecting
- Make sure you press the cancel button of the indicator lamp shines 15 times and then releases it.
- Your printer will print the network’s information page which shall indicate the connectivity
- This means that the installation was successful and can be conveniently used now.
- When your printer is connected to your internet connection, both flashes turn off.
If you resolved your how-to setup canon Pixma mg3022, make sure you visit our website to know more about the features of Canon Pixma and use it hassle-free!