For vertical mills, high temperature failures are inevitable. The following is an emergency treatment method for ultrafine vertical mill high temperature failure.

First of all, “opening the pot” is one of the common high-temperature faults in construction machinery. When the water temperature is too high, you should not rush to open the water radiator cover to dissipate heat. This will easily cause the hot water to squirt and injure people.

When the operator finds that the engine of the vertical mill is “opening”, stop the operation immediately, do not turn off the flame, let the engine idle, and open the blinds all the way to increase the air flow, so that the water temperature slowly drops under the action of the cooling fan and Releases a large amount of air bubbles generated by the cooling system.